SPCC vs. SECC vs. SGCC vs. SPHC

SPCC, SECC, SGCC, and SPHC, while seemingly similar, exhibit significant differences in their mechanical properties, corrosion resistance, formability, and other characteristics due to variations in their production processes and surface treatments. These differences directly influence their applications in industrial manufacturing. This article delves into the properties of these four types of steel to help readers select the most suitable material for their specific needs.

Definitions and Composition

  • SPCC (General Purpose Cold-Rolled Carbon Steel Sheet and Strip): Primarily composed of iron, carbon, and minor alloying elements, SPCC is produced through a cold-rolling process. It is equivalent to DC01 and ST12.
  • SPHC (Steel Plate Hot Commercial): Also known as HOT, SPHC is produced through a hot-rolling process. It primarily consists of iron and carbon and is equivalent to the national standard 08AL.
  • SECC (Electrolytic Galvanized Steel Sheet): Cold-rolled steel sheet coated with a thin layer of zinc through an electrolytic process. In addition to iron and carbon, it also contains zinc. Common thickness ranges from 0.4 to 3.2 mm.
  • SGCC (Hot-Dip Galvanized Steel Sheet): Hot-rolled or cold-rolled steel is cleaned, annealed, and then immersed in a molten zinc bath at approximately 460°C to form a zinc coating on the surface. This process results in excellent rust prevention, corrosion resistance, weatherability, and workability.
Galvanized Sheet Steel Coil
Galvanized Sheet Steel Coil

Production Processes

  • SPCC material: Produced through cold-rolling, offering high dimensional accuracy and surface quality.
  • SPHC material: Produced through hot-rolling, resulting in a surface oxide layer (mill scale) that provides some protection.
  • SECC material: A zinc coating is electroplated onto cold-rolled steel to enhance its rust and corrosion resistance.
  • SGCC material: A zinc coating is applied to hot-rolled or cold-rolled steel through hot-dip galvanizing.

SPCC vs. SPHC

FeatureSPCC (Cold-Rolled Steel)SPHC (Hot-Rolled Steel)Detailed Explanation
Production ProcessCold-rolled (pickling, cold-rolling)Hot-rolledSPCC is produced from hot-rolled steel billets through pickling and cold-rolling; SPHC is produced by directly heating and rolling steel billets.
Surface FinishSmooth, glossyRough, with mill scaleSPCC has a smooth surface suitable for direct coating or plating; SPHC requires pre-treatment such as pickling before further surface treatments.
Dimensional AccuracyHighRelatively lowSPCC has higher dimensional accuracy and smaller tolerances; SPHC has relatively lower dimensional accuracy.
Mechanical PropertiesHigh strength and hardness, good ductilityLower strength and hardness, poor ductilitySPCC has higher strength and hardness due to cold working, but also has good ductility; SPHC has lower strength and hardness due to high-temperature processing and poorer ductility.
FormabilityExcellent, easy to stamp and bendGood, but not as good as SPCCSPCC has better formability, suitable for complex shapes; SPHC has good formability but not as good as SPCC.
WeldabilityGoodGenerally goodSPCC has good weldability; SPHC generally has good weldability but may require pre-treatment.
PriceRelatively highRelatively lowSPCC has a more complex production process and higher cost; SPHC has a simpler production process and lower cost.
ApplicationsPrecision parts, automotive components, appliance housings requiring high surface quality and dimensional accuracyStructural components, large components, building materials where cost is a concernSPCC is commonly used for parts requiring high surface quality and dimensional accuracy; SPHC is commonly used for large components with lower strength requirements.
OthersProne to rust, requires surface treatment; higher priceRough surface, requires surface treatment; lower priceSPCC is more prone to rust due to its smooth surface; SPHC has slightly better corrosion resistance due to the protective mill scale.

SECC vs. SGCC

FeatureSECCSGCC
Zinc CoatingElectrolytic platingHot-dip galvanizing
Surface FinishSmootherRougher
Corrosion ResistanceModerateExcellent
CostGenerally lowerGenerally higher
FormabilityGoodGood, but slightly less than SECC

Performance Characteristics

MaterialImagesCharacteristics
SPCCGood formability, processability, surface quality, dimensional accuracy, and weldability
SPHCSoft, easy to process, low cost, low strength
SECCExcellent rust and corrosion resistance, good stamping performance, but higher cost
SGCCExcellent corrosion resistance, good formability, easy to weld

Applications

  1. SPCC: Widely used in automotive manufacturing, appliance production, precision instrument manufacturing, and structural component manufacturing.
  2. SECC: Suitable for manufacturing copier cases, electronic computer housings, printers, display monitors, and other office equipment housings, as well as parts requiring high corrosion resistance and stamping performance.
  3. SGCC: Primarily used in construction, appliances, automotive, machinery, and electronics industries, such as for roofs, wall panels, washing machine and refrigerator housings, and automotive body panels.
  4. SPHC: Widely used for car bodies, electrical equipment housings, and other components that do not require high strength, as well as materials that require bending.

Conclusion

Materials are the foundation of product performance. Choosing the right material can not only improve product quality and service life but also reduce production costs. This article provides a comparative analysis of SPCC, SECC, SGCC, and SPHC to assist engineering technicians in selecting the appropriate materials for their applications. Contact our team now!

Share:

Leave your needs here!

As one of the most professional steel manufacturers and suppliers in China, we’re featured by good service and competitive price. Please rest assured to buy high quality steel for sale here from our factory. Contact us for pricelist and free sample.

SPCC vs. SECC vs. SGCC vs. SPHC

Table of Contents

Share:

Albert Turner

Albert Turner is an experienced steel content writer with over 5 years of experience creating content related to the steel industry.

Explore Our Products

Recent Posts

Related Posts

Scroll to Top